5 Item Items
Warning: Last items in stock!
- Drying ovens are used in research and industry:
+ In the pharmaceutical industry, the food industry, but also in environmental technology to determine the dry content and humidity content using weighing equipment.
+ In electronics for drying components, degassing epoxy resins
+ In research for sample preparation
+ In industry for the ageing of plastics
+ In hospitals to warm up blankets, rinsing solutions, etc.
Volume: 449 liters
Interior dimension: width 1040 x height 720 x depth 600 (less 39 mm for fan) mm
Exterior dimension: width 1224 x height 1247 x depth 784 mm
Standard equipment: 02 stainless steel grids.
Working temperature range: +10oC above ambient temperature up to +300oC
Resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)
Forced air circulation by quiet air turbine, adjustable in 10 % steps.
Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display with touch-sensitive buttons.
Parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), air flap position, programme time.
Use Pt100 sensor DIN class A.
Adjustment of pre-heated fresh air admixture by air flap control in 10% steps.
Self-diagnostics for fault analysis.
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12 880 to switch off the heating approx. 20°C above nominal temperature.
Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel.
Internal data logger with a storage capacity of at least 10 year.
Setting of languages on ControlCOCKPIT: German, English, Spanish, French.
Operation Mode timer: continous and adjustable from 1 minute to 99 days.
The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points.
Alarm by symbol.
Calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
Programme stored in case of power failure.
Include works calibration certificate for +160°C.
100% safety for air (100% AtmoSAFE)
Voltage / Power Rating: 400 V (+/ 10 %), 3 phases/N, 50/60 Hz / approx. 5800 W
+ Works calibration certificate of manufacturer
+ Stainless steel grids
+ Operators manual