12 Item Items
Warning: Last items in stock!
– Microcomputer control with LCD display and touch buttons
– Temperature, time and running status are displayed and error alarms will sound if there is a problem.
– Water filling, heating, sterilization, exhaust and drying are fully automatic.
– Special positive pressure pulse for exhaust completely eliminates cold air in chamber.
– Heat drying function can reduce humidity residue to less than 3%.
– Steam-water internal circulation system doesn’t need water connection. (They are needed only for models 5070/5090 which need to be connected to the water tap connection to supply the steam generator)
– Chamber heating system heats up quickly with uniform temperature during the pre-heating stage.
– Various programs such as instruments textiles and rubber can be chosen.
– Buzzer will alarm at the end of the cycle.
– Printer is optional and can print the date, time and complete cycle process
medi-large-table-tops-2– Overheating protection: there is an extra protection to stop any overheating.
– There is an extra protection to avoid any over pressure.
– Door interlock device: The program can only start after the door is closed completely with the electronic door lock. The door cannot be opened if there is pressure in chamber or the power is switched off.
– Short circuit safety device: For alternating current the major loop has a short circuit device. Direct current loop has over voltage protection
Design pressure: 0.28Mpa
Maximum working pressure: 0.23Mpa
Vacuum degree: -80Kpa
Cycle time: 35—50 minutes
Chamber material: SUS304 stainless steel
Water requirement: Distilled water
Design temperature: 150°C
Sterilization temperature: 121/134°C
Maximum working temperature: 135°C
Temperature uniformity: =±0.5°C